Op-Amp 6-Line Audio Mixer Circuit

ARTIKEL ELEKTRONIKA

Free Auto Backlink

As with any audio mixer circuit, a slight loss is always introduced. The final summing amplifier has a gain of 2 or 6dB to overcome this. The Input line level should be around 200mV RMS.

Op-Amp 6-Line Audio Mixer CircuitSkema Rangkaian 6-Line Audio Mixer based Op-Amp

The mic inputs are amplified about 100 times or 40dB, the total gain of the mixer including the summing amplifier is 46dB. The mic input is designed for microphones with outputs of about 2mV RMS at 1 meter. Most dynamic microphones meet this standard.

The choice of IC op-amp is not critical in this circuit. Bipolar, FET input or MOS type op-amps can therefore be used; i.e 741, LF351, TL061, TL071, CA3140 etc. The power supply is a dual positive and negative supply, two 9 Volt batteries may be used as shown above or a power supply is recommended for longer periods of use
ARTIKEL ELEKTRONIKA

Free Auto Backlink

Both comments and trackbacks are currently closed.
%d blogger menyukai ini: