Image Motor Servo. Signaling Servo Motor
Servo motor will work best if given control pin on the PWM signal with a frequency of 50Hz. At which time a signal with frequency of 50Hz was reached on condition Ton 1.5ms duty cycle, the rotor of the motor will stop right in the middle (angle 0 ° / neutral). At Ton duty cycle of the signal is given less than 1.5ms, then the rotor will rotate to the left with an angle that the linear to the amount of Ton duty cycle, and positioned it will survive. And conversely, if Ton duty cycle of the signal is given more than 1.5ms, then the rotor will rotate to the right with an angle which is also linear tosize of Ton duty cycle , and ispositioned to survive .